Irkolin GOLD - lazura za drvo sa voskom i UV zaštitom

IRKOLIN GOLD

WAX STAIN

IRKOLIN GOLD

WAX STAIN

IRKOLIN GOLD is thick-layer stain coat with wax and UV blockers. It is based on alkyd resins, UV resistant pigments, special additives and adequate solvents. It can be use for decoration and protection of interior and exterior wood. It’s especially suitable for coating of wood exposed to extreme weather conditions –sun, high moisture, rain, snow etc. Wax fills wood pores. High content of wax enhances durability, resistancy, elasticity and silky shine of surface. Although, wood structure remains visable. When applied, IRKOLIN GOLD behaves the same way as wood –it spreads in the heat and that way adjust towood movements.UV blockers preventscolor changing, cracking and peeling off. Wood is complitely protected for a long time. This stain,made inIRKOM laboratories,beside wax, contains other components that enable long-term durability. It’s achieved by coat self-reparation after winter period; thismakes wood look fresh painted. Besides, IRKOM GOLD is complitely water resistant and prevents migration of moisture into the wood.

You have to heat IRKOLIN GOLD before use. Put the can on radiators, in sunlightor in hot wateruntil waxmelt and stain become enough liquid for use. Heated stain is easy for painting, leaves evenly coat on substrate and is better absorbed. After heating,stir tha paint with some wide-surface thing(like ruler), so it become homogenized. Don’t shake the can. At this point,paint is ready for usage. Apply one or two coats of IRKOLIN GOLD with brush, roller or spray gun. Too thick layer can causemigration of wax at coat surface –this leads to mechanical damage (coatwillpeel off), and slight coat can’t provide good protection. We don’t recommend thinning; you can eventually thin paintwhen you paint with spray
pistol, withno more than 10% of thinner (pistol nozzle has to be 1.6 to 1.8 mm). Thinner shortens paint lifespan, so try to avoid it. Tools have to be cleaned with nitro thinner.
Appliance onto new,untreated wooden substrate
IRKOLIN GOLD is stain with high content of wax andhigh density, so we don’t recommend appliance direct onto new wooden surface –this stain can’t penetrate deep into new wooden substrate. We recommend to previously paintsubstrate with IRKOM GOLD PRIMER or IRKOLIN CLASSIC –depending on look you want to achieve. IRKOLIN GOLD PRIMER is clear thin-layerstain, penetrates deeply into wood, fills pores in wood, binds with woodfibers and makes perfect substrate for IRKOLIN GOLD. IRKOLIN CLASSIC is thin-layerstain and we use it as primer for IRKOLIN GOLD whenwe want more intensive colorof IRKOLIN GOLD. In that case, IRKOLIN GOLD and IRKOLIN CLASSIC have to be the same colour. Apply IRKOLIN GOLD when IRKOLIN CLASSIC is dry to touch. You will make better effect if you sand IRKOLIN CLASSIC with sand paper 260 –320. If the wooden surface is coarse, sand it, clean the dust and than apply IRKOLIN GOLD. We don’t recommend applying of lane firnis as primer.
Appliance onto previously treatened wooden surface:
Remove old loose particles of old stain coat, clean well,let it dry and apply 2 coats of IRKOLIN GOLD with brush or by immersion.

Shelf life: 36 month from the date of manufacturing.
Coverage: 0.75 l covers 6 –8 m² (one coat)
Packages: 0,75l, 3l, 10l
Drying time 12 to 24 hours between two coats

If you want better results sand the surface after each layer.Special storage conditions are not required.

i

TECHNICAL DATA SHEET

p

Warnings

Irkolin Gold color palette

01 CLEAR

02 NATURAL PINE

03 TEAK

04 WALNUT

05 EBONY

07 MAHOGANY

08 OAK

09 ROSE WOOD

10 CHESTNUT

50 RED

52 GREEN

53 YELLOW

55 WHITE