3in1 NEW ANTIQUE

WROUGHT IRON EFFECT

PAINT FOR METAL

DIRECT-TO-RUST

Irkom 3in1 NOVA ANTIKA is advanced formulation of quick-dry paint with metal swarf. It applies directly onto corrosion and prevent its increase. Metal swarf gives embossed texture look to the surface. Paint with finer swarf is also available and it is much easier for work, even for someone who doesn’t have a lot of painting expiriance.

MAKE OLD INTO NEW!

CONTAINS ANTI-CORROSION, PRIMER AND TOP COAT

This paint enhances water repellency and that way prologs lasting of coat. UV blockers prevent change of color caused by sun exposure. Its characteristics are excellent hardness, elasticity, adhesion, impact resistacy and endurance in various weather conditions.

Quality of 3in1 NOVA ANTIKA is confirmed by Laboratory for hydrocarbon insulation and binders 007, Institute IMS a.d. from Belgrade, in accordance with reposrt AKZ 52/04-3.

IRKOM 3IN1 NOVA ANTIKA ADVENTAGES:

Your painting will be one day work
You will save materials
Paint will cover any imperfection on metal substrate
Protects 5 to 15 years
Endurable in all weather conditions
Excellent coverage
Elastic coating without cracking
Applying directly onto zinc
8 colors available

APLLIANCE

Can be applied onto new metal substrate, corroded metal and substrate with coating older than 2 years. It also can be applied onto galvanized sheet metal and aluminum– degreasing with Degreaser M is necessary before painting – and onto wood and plastic. You can paint metal railings, garden gates, balcony railings, metal furniture and accessories, window ledges, gutters, agricultural mechanization, radiators, ETS (withstands temperature over 1000C).

USAGE GUDANCE

Onto new metal substrate

Degrease substrate with Degreaser m and apply two coats thickness 120 microns. Apply NOVA ANTIKA with brush or spray pistol. During the work stir paint periodically to lift all swarf from the bottom. Ig surfaces paint with spray. Second coat has to be applied wet-to-wet, at most 4 hours after the first one (this also saves your time). Coat is dry to touch after 30 to 60 minutes, and complitely dry after 72 hours. Cross linking is complite after 30 days and it makes this coating very endurable.

Onto corroded metal

Remove loose rust particles from the substrate, clean and complitely degrease. Than apply paint the same way we describe for new metal substrates.
3in1 NOVA ANTIKA – Applying with brush: we don’t recommend thinning, but if it is necessara to make painting easier, thin it a little. Apply it only by TAPPING so swarf can not group at one point.
Applying with pistol: thin with thinner 5% at most; nozzle has to be 2,4 mm; pressure at pistol outlet has to be 3,2 bars and pressure at compressor 3,8 bars.
3in1 NOVA ANTIKA FINA – Applying with brush: don’t thin the paint. Apply by classic brushing or by tapping.
Applying with pistol: thin up to 5%; required nozzle 1,8 – 2 mm; required outlet pressure on pistol 3,2 bars, in compressor 3,8 bars.

ATTENTION

During the work stir paint periodically so metal swarf can’t fall to the bottom. Thay way you will avoid uneven coat.

Irkom 3u1 NOVA ANTIKA FINA - boja za metal

3in1 NOVA ANTIKA FINA

3in1 NOVA ANTIKA has very fine structure and contains finer metal swarf. It is suitable for begginers, for applying by classic brushing, without tapping. It is available in 8 colors.

DEGRREASER M

Degreaser-M is a cleaning agent, i.e. a colorless mixture intended for the removal of surface impurities during preparation for coating application. It is created by a combination of organic solvents and thinners.