PAINT FOR METAL
DIRECT TO RUST
Irkom 3in1 is advanced formulation of quick-dry paint for metal. It applies directly onto corrosion and prevents its further increase.
CONTAINS ANTI – RUST, PRIMER AND TOP COAT
This color enhance water repellency and coating durability. UV blockers unable color change caused by sun exposure. Its characteristics are extraordinary hardness, elasticity, adhesion, impact resistancy and protection in various weather conditions.
IRKOM 3in1 adventage
- One day work
- Material saving
- Protect 5 to 15 years
- Endurance at any weather condition
- Excellent coverage
- Elastic coat without cracking
- Apply directly onto zinc
- More than 20 colors
APPLIANCE
It can be apply onto new metal, corroded metal and metal with old paint (older than 2 years). It can be applied onto galvanized sheet metal and aluminium (soft sanding and degreasing with Degreaser M before painting necessary, no primer needed). It can also be applied onto wood and plastic substrate. You can paint metal railings, garden gates, balcony railings, metal furniture and metal accessories, agricultural mechanization, window ledges, gutters, radiators, ETS (withstands temperature over 1000C).
USAGE GUIDANCE
Onto new metal
Degrease substrate with Degreaser M, Apply two coats of paint, thickness 120 microns. It is enough to stop further migration of corrosion. First coat has to be applied slightly, and second coat has to be thicker. Apply second coat wet-to-wet, at most 4 hours after the first one (saving your time). Irkom 3in1 is dry to touch after 30 to 60 minutes, and complitely dry after 72 hours. Cross linking is complete after 30 days and it makes this coating extremely endurable.
Onto corroded metal
Remove loose rust particles, clean well and degrease metal substrate. After that apply two coats of paint directly onto corrosion the same way as for the new metal surface.
3in1 – Applying with brush: thin with R1 thinner 5 – 10%. Applying with roller: use nitro resistant roller; thin paint with R1 5 – 10%
Applying with spray pistol: thin with R1 10 – 20%, required nozzle 1.6 – 1.8 mm; required outlet pistol pressure 3.2 bars, required compressor pressore 3.8 bars.
3u1 ton karta
RAL 1018
YELLOW
RAL 3001
RED
RAL 3011
BORDEAUX
RAL 3020
IMT RED
RAL 5013
DARK BLUE
RAL 5017
LIGHT BLUE
RAL 6002
LIGHT GREEN
RAL 6005
DARK GREEN
RAL 7011
IMT GREY
RAL 7038
GRAY
RAL 8015
LIGHT BROWN
RAL 8016
DARK BROWN
RAL 9005
BLACK
RAL 9005 mat
MATTE BLACK
RAL 9016
WHITE
RAL 9016 MAT
MATTE WHITE
RAL 7016
ANTRACIT
RAL 2008
ORANGE
GOLD
SILVER RAL 9006
COPPER
THIN 3IN1 ONLY WITH R1 SOLVENT
R1 SOLVENT contains components that will dissolve the paint in the best way. It will adjust viscosity without changing paint quality.
R1 solvent is packed in metal 0.5l, 1l and 10l package.
