IRKOLIN EXTRA
WOOD STAIN WITH VARNISH
IRKOLIN EXTRA
WOOD STAIN WITH VARNISH
IRKOLIN EXTRA is stain with varnish, based on synthetic resins, light resistant pigments, fungicidal and insecticidal additives and adequate solvents. It provides decoration and protection of interior and exterior wooden substrates (windows, doors, railings, paneling). It penetrates into the wood, protect and shadesit. UnlikeIRKOLIN CLASSIC, it is very shiny because it contains varnish. It can’t be used as primer for IRKOLIN GOLD, because it has higher density than IRKOLIN CLASSIC and makes thicker coat at wood surface. Due to hight content of resin and varnish, it can not adjust to wood movements (spreadingand shrinking as temperature changes), so it’s better to use it for interior painting.IRKOLIN EXTRA is clear and tough coat applied with brush, velour roller or spray pistol. We recommend 1 –2 coats for interior painting and 2 –3 for exterior painting.If you apply more coats it will reduce clearness (texture and rings will beless visable).
Stir IRKOLIN EXTRA before use (shake by no means) –shaking makes bubbles and bubbles will deform coat. This stain is very liquid and contains big amountof pigments, which falls to can bottom relatively quiclky, so it’s also necessary to stir the paintperiodicaly during the work. That way you will avoid uneven colour of surface. Thinner is not required for this paint.
New wooden substrate, wood that is not previously painted, need to be softly sanded with sand paper 120 –180. After tnat, wipe the surface with dry brush and apply the paint. Don’t wipe with clothe, because itwill leave fibers on surface and fibers will make bumps in paint.
Previously painted wooden substrate has to be sanded, loose particles of old paint have to be removed, dust cleaned and than you can apply the paint. After 24 hours you repeat the procedure –soft sanding for removing lifted wood fibers, wiping of dust with dry brush and applying of second coat.
New wooden substrate, wood that is not previously painted, need to be softly sanded with sand paper 120 –180. After tnat, wipe the surface with dry brush and apply the paint. Don’t wipe with clothe, because itwill leave fibers on surface and fibers will make bumps in paint.
Previously painted wooden substrate has to be sanded, loose particles of old paint have to be removed, dust cleaned and than you can apply the paint. After 24 hours you repeat the procedure –soft sanding for removing lifted wood fibers, wiping of dust with dry brush and applying of second coat.
Required temperature for work performance: +100C to +300C. Don’t apply it when the moisture is more than 80%, during the rain, fog or at strong sun.
Coverage: 150 g/m²
Expiring date: 36 months
Storage: +5°C do +30°C. Keep away from moisture.
- Drying time between two coats 12 to 24 hours.
- Between two coats you have to softly sand the surface; do it carefully and don’t damage previous coat because it will causeuneven colour of painted surface.
- Expiration date: 36 months from the date of manufacturing
- Package: 0.75l, 3l
TECHNICAL DATA SHEET
Warnings
Irkolin Extra color palette
01 clear
02 pine
03 teak
04 walnut
05 ebony
07 mahogany
08 oak
09 rosewood
10 chestnut
50 red
52 green
53 yellow
55 white
