BETOLIN STRONG
PRIMER
BETOLIN STRONG
PRIMER
Coating based on one-component polyurethane binder. It is used as a primer (impregnation) on worse, more porous concrete substrates older than 28 days and as a primer for ferroconcrete substrates. By applying Betolin Strong primer, a better adhesion is achieved and thus a longer life of the Betolin Strong finishing paint. This primer is characterized by very fast drying, simple application, is very resistant to atmospheric influences, moisture, oils, lubricants and other chemicals.
The use of a primer reduces the consumption of the Betolin Strong topcoat.
The substrate must be dry, rough, clean, free of grease and dust. New concrete substrates and plastered substrates must be roughened and aged for a minimum of 28 days before the application of Betolin Strong primer.
Mix the paint well before use.
Betolin Strong primer is applied to the substrate, and then Betolin paint for concrete surfaces is applied in two layers. Depending on the application, Betolin Strong primer is diluted up to 20% with thinner B if the application is done with a pneumatic gun, and if the coating is applied with a brush or roller, it does not need to be diluted.
Immediately after use, the tool should be thoroughly washed with thinner B.
Drying time (20°C):
– To the touch – 30 min,
-Completely – 24 hours.
For applying the final paint Betolin Strong min. 12 o’clock
Consumption: 6-8 m²
Shelf life: 24 months
Shades: colorless
Warnings
